Micropython module for SHT85 humidity&temperature sensor from Sensirion. Link: [https://sensirion.com/products/catalog/SHT85/]
Just connect your SHT85 board to Arduino, ESP or any other board with MicroPython firmware.
Supply voltage SHT85 from 2.15 to 5.5 volts, typical 3.3 Volt! Use four wires to connect.
Copy the following files to your board: main.py sht85sen.py sensor_pack folder
Then open main.py in your IDE and run it!
- +3.3 V
- GND
- SDA
- SCL
