/*! *****************************************************************************

Copyright (c) Microsoft Corporation. All rights reserved.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use

this file except in compliance with the License. You may obtain a copy of the

License at http://www.apache.org/licenses/LICENSE-2.0

THIS CODE IS PROVIDED ON AN *AS IS* BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED

WARRANTIES OR CONDITIONS OF TITLE, FITNESS FOR A PARTICULAR PURPOSE,

MERCHANTABLITY OR NON-INFRINGEMENT.

See the Apache Version 2.0 License for specific language governing permissions

and limitations under the License.

***************************************************************************** */

/// <reference no-default-lib="true"/>

/////////////////////////////

/// ECMAScript APIs

/////////////////////////////

declare const NaN: number;

declare const Infinity: number;

/**

* Evaluates JavaScript code and executes it.

* @param x A String value that contains valid JavaScript code.

*/

declare function eval(x: string): any;

/**

* Converts A string to an integer.

* @param s A string to convert into a number.

* @param radix A value between 2 and 36 that specifies the base of the number in numString.

* If this argument is not supplied, strings with a prefix of '0x' are considered hexadecimal.

* All other strings are considered decimal.

*/

declare function parseInt(s: string, radix?: number): number;

/**

* Converts a string to a floating-point number.

* @param string A string that contains a floating-point number.

*/

declare function parseFloat(string: string): number;

/**

* Returns a Boolean value that indicates whether a value is the reserved value NaN (not a number).

* @param number A numeric value.

*/

declare function isNaN(number: number): boolean;

/**

* Determines whether a supplied number is finite.

* @param number Any numeric value.

*/

declare function isFinite(number: number): boolean;

/**

* Gets the unencoded version of an encoded Uniform Resource Identifier (URI).

* @param encodedURI A value representing an encoded URI.

*/

declare function decodeURI(encodedURI: string): string;

/**

* Gets the unencoded version of an encoded component of a Uniform Resource Identifier (URI).

* @param encodedURIComponent A value representing an encoded URI component.

*/

declare function decodeURIComponent(encodedURIComponent: string): string;

/**

* Encodes a text string as a valid Uniform Resource Identifier (URI)

* @param uri A value representing an encoded URI.

*/

declare function encodeURI(uri: string): string;

/**

* Encodes a text string as a valid component of a Uniform Resource Identifier (URI).

* @param uriComponent A value representing an encoded URI component.

*/

declare function encodeURIComponent(uriComponent: string): string;

interface PropertyDescriptor {

configurable?: boolean;

enumerable?: boolean;

value?: any;

writable?: boolean;

get? (): any;

set? (v: any): void;

}

interface PropertyDescriptorMap {

[s: string]: PropertyDescriptor;

}

interface Object {

/** The initial value of Object.prototype.constructor is the standard built-in Object constructor. */

constructor: Function;

/** Returns a string representation of an object. */

toString(): string;

/** Returns a date converted to a string using the current locale. */

toLocaleString(): string;

/** Returns the primitive value of the specified object. */

valueOf(): Object;

/**

* Determines whether an object has a property with the specified name.

* @param v A property name.

*/

hasOwnProperty(v: string): boolean;

/**

* Determines whether an object exists in another object's prototype chain.

* @param v Another object whose prototype chain is to be checked.

*/

isPrototypeOf(v: Object): boolean;

/**

* Determines whether a specified property is enumerable.

* @param v A property name.

*/

propertyIsEnumerable(v: string): boolean;

}

interface ObjectConstructor {

new (value?: any): Object;

(): any;

(value: any): any;

/** A reference to the prototype for a class of objects. */

readonly prototype: Object;

/**

* Returns the prototype of an object.

* @param o The object that references the prototype.

*/

getPrototypeOf(o: any): any;

/**

* Gets the own property descriptor of the specified object.

* An own property descriptor is one that is defined directly on the object and is not inherited from the object's prototype.

* @param o Object that contains the property.

* @param p Name of the property.

*/

getOwnPropertyDescriptor(o: any, p: string): PropertyDescriptor;

/**

* Returns the names of the own properties of an object. The own properties of an object are those that are defined directly

* on that object, and are not inherited from the object's prototype. The properties of an object include both fields (objects) and functions.

* @param o Object that contains the own properties.

*/

getOwnPropertyNames(o: any): string[];

/**

* Creates an object that has the specified prototype or that has null prototype.

* @param o Object to use as a prototype. May be null.

*/

create<T extends object>(o: T | null): T | object;

/**

* Creates an object that has the specified prototype, and that optionally contains specified properties.

* @param o Object to use as a prototype. May be null

* @param properties JavaScript object that contains one or more property descriptors.

*/

create(o: object | null, properties: PropertyDescriptorMap): any;

/**

* Adds a property to an object, or modifies attributes of an existing property.

* @param o Object on which to add or modify the property. This can be a native JavaScript object (that is, a user-defined object or a built in object) or a DOM object.

* @param p The property name.

* @param attributes Descriptor for the property. It can be for a data property or an accessor property.

*/

defineProperty(o: any, p: string, attributes: PropertyDescriptor): any;

/**

* Adds one or more properties to an object, and/or modifies attributes of existing properties.

* @param o Object on which to add or modify the properties. This can be a native JavaScript object or a DOM object.

* @param properties JavaScript object that contains one or more descriptor objects. Each descriptor object describes a data property or an accessor property.

*/

defineProperties(o: any, properties: PropertyDescriptorMap): any;

/**

* Prevents the modification of attributes of existing properties, and prevents the addition of new properties.

* @param o Object on which to lock the attributes.

*/

seal<T>(o: T): T;

/**

* Prevents the modification of existing property attributes and values, and prevents the addition of new properties.

* @param o Object on which to lock the attributes.

*/

freeze<T>(a: T[]): ReadonlyArray<T>;

/**

* Prevents the modification of existing property attributes and values, and prevents the addition of new properties.

* @param o Object on which to lock the attributes.

*/

freeze<T extends Function>(f: T): T;

/**

* Prevents the modification of existing property attributes and values, and prevents the addition of new properties.

* @param o Object on which to lock the attributes.

*/

freeze<T>(o: T): Readonly<T>;

/**

* Prevents the addition of new properties to an object.

* @param o Object to make non-extensible.

*/

preventExtensions<T>(o: T): T;

/**

* Returns true if existing property attributes cannot be modified in an object and new properties cannot be added to the object.

* @param o Object to test.

*/

isSealed(o: any): boolean;

/**

* Returns true if existing property attributes and values cannot be modified in an object, and new properties cannot be added to the object.

* @param o Object to test.

*/

isFrozen(o: any): boolean;

/**

* Returns a value that indicates whether new properties can be added to an object.

* @param o Object to test.

*/

isExtensible(o: any): boolean;

/**

* Returns the names of the enumerable properties and methods of an object.

* @param o Object that contains the properties and methods. This can be an object that you created or an existing Document Object Model (DOM) object.

*/

keys(o: any): string[];

}

/**

* Provides functionality common to all JavaScript objects.

*/

declare const Object: ObjectConstructor;

/**

* Creates a new function.

*/

interface Function {

/**

* Calls the function, substituting the specified object for the this value of the function, and the specified array for the arguments of the function.

* @param thisArg The object to be used as the this object.

* @param argArray A set of arguments to be passed to the function.

*/

apply(this: Function, thisArg: any, argArray?: any): any;

/**

* Calls a method of an object, substituting another object for the current object.

* @param thisArg The object to be used as the current object.

* @param argArray A list of arguments to be passed to the method.

*/

call(this: Function, thisArg: any, ...argArray: any[]): any;

/**

* For a given function, creates a bound function that has the same body as the original function.

* The this object of the bound function is associated with the specified object, and has the specified initial parameters.

* @param thisArg An object to which the this keyword can refer inside the new function.

* @param argArray A list of arguments to be passed to the new function.

*/

bind(this: Function, thisArg: any, ...argArray: any[]): any;

/** Returns a string representation of a function. */

toString(): string;

prototype: any;

readonly length: number;

// Non-standard extensions

arguments: any;

caller: Function;

}

interface FunctionConstructor {

/**

* Creates a new function.

* @param args A list of arguments the function accepts.

*/

new (...args: string[]): Function;

(...args: string[]): Function;

readonly prototype: Function;

}

declare const Function: FunctionConstructor;

interface IArguments {

[index: number]: any;

length: number;

callee: Function;

}

interface String {

/** Returns a string representation of a string. */

toString(): string;

/**

* Returns the character at the specified index.

* @param pos The zero-based index of the desired character.

*/

charAt(pos: number): string;

/**

* Returns the Unicode value of the character at the specified location.

* @param index The zero-based index of the desired character. If there is no character at the specified index, NaN is returned.

*/

charCodeAt(index: number): number;

/**

* Returns a string that contains the concatenation of two or more strings.

* @param strings The strings to append to the end of the string.

*/

concat(...strings: string[]): string;

/**

* Returns the position of the first occurrence of a substring.

* @param searchString The substring to search for in the string

* @param position The index at which to begin searching the String object. If omitted, search starts at the beginning of the string.

*/

indexOf(searchString: string, position?: number): number;

/**

* Returns the last occurrence of a substring in the string.

* @param searchString The substring to search for.

* @param position The index at which to begin searching. If omitted, the search begins at the end of the string.

*/

lastIndexOf(searchString: string, position?: number): number;

/**

* Determines whether two strings are equivalent in the current locale.

* @param that String to compare to target string

*/

localeCompare(that: string): number;

/**

* Matches a string with a regular expression, and returns an array containing the results of that search.

* @param regexp A variable name or string literal containing the regular expression pattern and flags.

*/

match(regexp: string): RegExpMatchArray | null;

/**

* Matches a string with a regular expression, and returns an array containing the results of that search.

* @param regexp A regular expression object that contains the regular expression pattern and applicable flags.

*/

match(regexp: RegExp): RegExpMatchArray | null;

/**

* Replaces text in a string, using a regular expression or search string.

* @param searchValue A string to search for.

* @param replaceValue A string containing the text to replace for every successful match of searchValue in this string.

*/

replace(searchValue: string, replaceValue: string): string;

/**

* Replaces text in a string, using a regular expression or search string.

* @param searchValue A string to search for.

* @param replacer A function that returns the replacement text.

*/

replace(searchValue: string, replacer: (substring: string, ...args: any[]) => string): string;

/**

* Replaces text in a string, using a regular expression or search string.

* @param searchValue A Regular Expression object containing the regular expression pattern and applicable flags.

* @param replaceValue A string containing the text to replace for every successful match of searchValue in this string.

*/

replace(searchValue: RegExp, replaceValue: string): string;

/**

* Replaces text in a string, using a regular expression or search string.

* @param searchValue A Regular Expression object containing the regular expression pattern and applicable flags

* @param replacer A function that returns the replacement text.

*/

replace(searchValue: RegExp, replacer: (substring: string, ...args: any[]) => string): string;

/**

* Finds the first substring match in a regular expression search.

* @param regexp The regular expression pattern and applicable flags.

*/

search(regexp: string): number;

/**

* Finds the first substring match in a regular expression search.

* @param regexp The regular expression pattern and applicable flags.

*/

search(regexp: RegExp): number;

/**

* Returns a section of a string.

* @param start The index to the beginning of the specified portion of stringObj.

* @param end The index to the end of the specified portion of stringObj. The substring includes the characters up to, but not including, the character indicated by end.

* If this value is not specified, the substring continues to the end of stringObj.

*/

slice(start?: number, end?: number): string;

/**

* Split a string into substrings using the specified separator and return them as an array.

* @param separator A string that identifies character or characters to use in separating the string. If omitted, a single-element array containing the entire string is returned.

* @param limit A value used to limit the number of elements returned in the array.

*/

split(separator: string, limit?: number): string[];

/**

* Split a string into substrings using the specified separator and return them as an array.

* @param separator A Regular Express that identifies character or characters to use in separating the string. If omitted, a single-element array containing the entire string is returned.

* @param limit A value used to limit the number of elements returned in the array.

*/

split(separator: RegExp, limit?: number): string[];

/**

* Returns the substring at the specified location within a String object.

* @param start The zero-based index number indicating the beginning of the substring.

* @param end Zero-based index number indicating the end of the substring. The substring includes the characters up to, but not including, the character indicated by end.

* If end is omitted, the characters from start through the end of the original string are returned.

*/

substring(start: number, end?: number): string;

/** Converts all the alphabetic characters in a string to lowercase. */

toLowerCase(): string;

/** Converts all alphabetic characters to lowercase, taking into account the host environment's current locale. */

toLocaleLowerCase(): string;

/** Converts all the alphabetic characters in a string to uppercase. */

toUpperCase(): string;

/** Returns a string where all alphabetic characters have been converted to uppercase, taking into account the host environment's current locale. */

toLocaleUpperCase(): string;

/** Removes the leading and trailing white space and line terminator characters from a string. */

trim(): string;

/** Returns the length of a String object. */

readonly length: number;

// IE extensions

/**

* Gets a substring beginning at the specified location and having the specified length.

* @param from The starting position of the desired substring. The index of the first character in the string is zero.

* @param length The number of characters to include in the returned substring.

*/

substr(from: number, length?: number): string;

/** Returns the primitive value of the specified object. */

valueOf(): string;

readonly [index: number]: string;

}

interface StringConstructor {

new (value?: any): String;

(value?: any): string;

readonly prototype: String;

fromCharCode(...codes: number[]): string;

}

/**

* Allows manipulation and formatting of text strings and determination and location of substrings within strings.

*/

declare const String: StringConstructor;

interface Boolean {

/** Returns the primitive value of the specified object. */

valueOf(): boolean;

}

interface BooleanConstructor {

new (value?: any): Boolean;

(value?: any): boolean;

readonly prototype: Boolean;

}

declare const Boolean: BooleanConstructor;

interface Number {

/**

* Returns a string representation of an object.

* @param radix Specifies a radix for converting numeric values to strings. This value is only used for numbers.

*/

toString(radix?: number): string;

/**

* Returns a string representing a number in fixed-point notation.

* @param fractionDigits Number of digits after the decimal point. Must be in the range 0 - 20, inclusive.

*/

toFixed(fractionDigits?: number): string;

/**

* Returns a string containing a number represented in exponential notation.

* @param fractionDigits Number of digits after the decimal point. Must be in the range 0 - 20, inclusive.

*/

toExponential(fractionDigits?: number): string;

/**

* Returns a string containing a number represented either in exponential or fixed-point notation with a specified number of digits.

* @param precision Number of significant digits. Must be in the range 1 - 21, inclusive.

*/

toPrecision(precision?: number): string;

/** Returns the primitive value of the specified object. */

valueOf(): number;

}

interface NumberConstructor {

new (value?: any): Number;

(value?: any): number;

readonly prototype: Number;

/** The largest number that can be represented in JavaScript. Equal to approximately 1.79E+308. */

readonly MAX_VALUE: number;

/** The closest number to zero that can be represented in JavaScript. Equal to approximately 5.00E-324. */

readonly MIN_VALUE: number;

/**

* A value that is not a number.

* In equality comparisons, NaN does not equal any value, including itself. To test whether a value is equivalent to NaN, use the isNaN function.

*/

readonly NaN: number;

/**

* A value that is less than the largest negative number that can be represented in JavaScript.

* JavaScript displays NEGATIVE_INFINITY values as -infinity.

*/

readonly NEGATIVE_INFINITY: number;

/**

* A value greater than the largest number that can be represented in JavaScript.

* JavaScript displays POSITIVE_INFINITY values as infinity.

*/

readonly POSITIVE_INFINITY: number;

}

/** An object that represents a number of any kind. All JavaScript numbers are 64-bit floating-point numbers. */

declare const Number: NumberConstructor;

interface TemplateStringsArray extends ReadonlyArray<string> {

readonly raw: ReadonlyArray<string>

}

interface Math {

/** The mathematical constant e. This is Euler's number, the base of natural logarithms. */

readonly E: number;

/** The natural logarithm of 10. */

readonly LN10: number;

/** The natural logarithm of 2. */

readonly LN2: number;

/** The base-2 logarithm of e. */

readonly LOG2E: number;

/** The base-10 logarithm of e. */

readonly LOG10E: number;

/** Pi. This is the ratio of the circumference of a circle to its diameter. */

readonly PI: number;

/** The square root of 0.5, or, equivalently, one divided by the square root of 2. */

readonly SQRT1_2: number;

/** The square root of 2. */

readonly SQRT2: number;

/**

* Returns the absolute value of a number (the value without regard to whether it is positive or negative).

* For example, the absolute value of -5 is the same as the absolute value of 5.

* @param x A numeric expression for which the absolute value is needed.

*/

abs(x: number): number;

/**

* Returns the arc cosine (or inverse cosine) of a number.

* @param x A numeric expression.

*/

acos(x: number): number;

/**

* Returns the arcsine of a number.

* @param x A numeric expression.

*/

asin(x: number): number;

/**

* Returns the arctangent of a number.

* @param x A numeric expression for which the arctangent is needed.

*/

atan(x: number): number;

/**

* Returns the angle (in radians) from the X axis to a point.

* @param y A numeric expression representing the cartesian y-coordinate.

* @param x A numeric expression representing the cartesian x-coordinate.

*/

atan2(y: number, x: number): number;

/**

* Returns the smallest number greater than or equal to its numeric argument.

* @param x A numeric expression.

*/

ceil(x: number): number;

/**

* Returns the cosine of a number.

* @param x A numeric expression that contains an angle measured in radians.

*/

cos(x: number): number;

/**

* Returns e (the base of natural logarithms) raised to a power.

* @param x A numeric expression representing the power of e.

*/

exp(x: number): number;

/**

* Returns the greatest number less than or equal to its numeric argument.

* @param x A numeric expression.

*/

floor(x: number): number;

/**

* Returns the natural logarithm (base e) of a number.

* @param x A numeric expression.

*/

log(x: number): number;

/**

* Returns the larger of a set of supplied numeric expressions.

* @param values Numeric expressions to be evaluated.

*/

max(...values: number[]): number;

/**

* Returns the smaller of a set of supplied numeric expressions.

* @param values Numeric expressions to be evaluated.

*/

min(...values: number[]): number;

/**

* Returns the value of a base expression taken to a specified power.

* @param x The base value of the expression.

* @param y The exponent value of the expression.

*/

pow(x: number, y: number): number;

/** Returns a pseudorandom number between 0 and 1. */

random(): number;

/**

* Returns a supplied numeric expression rounded to the nearest number.

* @param x The value to be rounded to the nearest number.

*/

round(x: number): number;

/**

* Returns the sine of a number.

* @param x A numeric expression that contains an angle measured in radians.

*/

sin(x: number): number;

/**

* Returns the square root of a number.

* @param x A numeric expression.

*/

sqrt(x: number): number;

/**

* Returns the tangent of a number.

* @param x A numeric expression that contains an angle measured in radians.

*/

tan(x: number): number;

}

/** An intrinsic object that provides basic mathematics functionality and constants. */

declare const Math: Math;

/** Enables basic storage and retrieval of dates and times. */

interface Date {

/** Returns a string representation of a date. The format of the string depends on the locale. */

toString(): string;

/** Returns a date as a string value. */

toDateString(): string;

/** Returns a time as a string value. */

toTimeString(): string;

/** Returns a value as a string value appropriate to the host environment's current locale. */

toLocaleString(): string;

/** Returns a date as a string value appropriate to the host environment's current locale. */

toLocaleDateString(): string;

/** Returns a time as a string value appropriate to the host environment's current locale. */

toLocaleTimeString(): string;

/** Returns the stored time value in milliseconds since midnight, January 1, 1970 UTC. */

valueOf(): number;

/** Gets the time value in milliseconds. */

getTime(): number;

/** Gets the year, using local time. */

getFullYear(): number;

/** Gets the year using Universal Coordinated Time (UTC). */

getUTCFullYear(): number;

/** Gets the month, using local time. */

getMonth(): number;

/** Gets the month of a Date object using Universal Coordinated Time (UTC). */

getUTCMonth(): number;

/** Gets the day-of-the-month, using local time. */

getDate(): number;

/** Gets the day-of-the-month, using Universal Coordinated Time (UTC). */

getUTCDate(): number;

/** Gets the day of the week, using local time. */

getDay(): number;

/** Gets the day of the week using Universal Coordinated Time (UTC). */

getUTCDay(): number;

/** Gets the hours in a date, using local time. */

getHours(): number;

/** Gets the hours value in a Date object using Universal Coordinated Time (UTC). */

getUTCHours(): number;

/** Gets the minutes of a Date object, using local time. */

getMinutes(): number;

/** Gets the minutes of a Date object using Universal Coordinated Time (UTC). */

getUTCMinutes(): number;

/** Gets the seconds of a Date object, using local time. */

getSeconds(): number;

/** Gets the seconds of a Date object using Universal Coordinated Time (UTC). */

getUTCSeconds(): number;

/** Gets the milliseconds of a Date, using local time. */

getMilliseconds(): number;

/** Gets the milliseconds of a Date object using Universal Coordinated Time (UTC). */

getUTCMilliseconds(): number;

/** Gets the difference in minutes between the time on the local computer and Universal Coordinated Time (UTC). */

getTimezoneOffset(): number;

/**

* Sets the date and time value in the Date object.

* @param time A numeric value representing the number of elapsed milliseconds since midnight, January 1, 1970 GMT.

*/

setTime(time: number): number;

/**

* Sets the milliseconds value in the Date object using local time.

* @param ms A numeric value equal to the millisecond value.

*/

setMilliseconds(ms: number): number;

/**

* Sets the milliseconds value in the Date object using Universal Coordinated Time (UTC).

* @param ms A numeric value equal to the millisecond value.

*/

setUTCMilliseconds(ms: number): number;

/**

* Sets the seconds value in the Date object using local time.

* @param sec A numeric value equal to the seconds value.

* @param ms A numeric value equal to the milliseconds value.

*/

setSeconds(sec: number, ms?: number): number;

/**

* Sets the seconds value in the Date object using Universal Coordinated Time (UTC).

* @param sec A numeric value equal to the seconds value.

* @param ms A numeric value equal to the milliseconds value.

*/

setUTCSeconds(sec: number, ms?: number): number;

/**

* Sets the minutes value in the Date object using local time.

* @param min A numeric value equal to the minutes value.

* @param sec A numeric value equal to the seconds value.

* @param ms A numeric value equal to the milliseconds value.

*/

setMinutes(min: number, sec?: number, ms?: number): number;

/**

* Sets the minutes value in the Date object using Universal Coordinated Time (UTC).

* @param min A numeric value equal to the minutes value.

* @param sec A numeric value equal to the seconds value.

* @param ms A numeric value equal to the milliseconds value.

*/

setUTCMinutes(min: number, sec?: number, ms?: number): number;

/**

* Sets the hour value in the Date object using local time.

* @param hours A numeric value equal to the hours value.

* @param min A numeric value equal to the minutes value.

* @param sec A numeric value equal to the seconds value.

* @param ms A numeric value equal to the milliseconds value.

*/

setHours(hours: number, min?: number, sec?: number, ms?: number): number;

/**

* Sets the hours value in the Date object using Universal Coordinated Time (UTC).

* @param hours A numeric value equal to the hours value.

* @param min A numeric value equal to the minutes value.

* @param sec A numeric value equal to the seconds value.

* @param ms A numeric value equal to the milliseconds value.

*/

setUTCHours(hours: number, min?: number, sec?: number, ms?: number): number;

/**

* Sets the numeric day-of-the-month value of the Date object using local time.

* @param date A numeric value equal to the day of the month.

*/

setDate(date: number): number;

/**

* Sets the numeric day of the month in the Date object using Universal Coordinated Time (UTC).

* @param date A numeric value equal to the day of the month.

*/

setUTCDate(date: number): number;

/**

* Sets the month value in the Date object using local time.

* @param month A numeric value equal to the month. The value for January is 0, and other month values follow consecutively.

* @param date A numeric value representing the day of the month. If this value is not supplied, the value from a call to the getDate method is used.

*/

setMonth(month: number, date?: number): number;

/**

* Sets the month value in the Date object using Universal Coordinated Time (UTC).

* @param month A numeric value equal to the month. The value for January is 0, and other month values follow consecutively.

* @param date A numeric value representing the day of the month. If it is not supplied, the value from a call to the getUTCDate method is used.

*/

setUTCMonth(month: number, date?: number): number;

/**

* Sets the year of the Date object using local time.

* @param year A numeric value for the year.

* @param month A zero-based numeric value for the month (0 for January, 11 for December). Must be specified if numDate is specified.

* @param date A numeric value equal for the day of the month.

*/

setFullYear(year: number, month?: number, date?: number): number;

/**

* Sets the year value in the Date object using Universal Coordinated Time (UTC).

* @param year A numeric value equal to the year.

* @param month A numeric value equal to the month. The value for January is 0, and other month values follow consecutively. Must be supplied if numDate is supplied.

* @param date A numeric value equal to the day of the month.

*/

setUTCFullYear(year: number, month?: number, date?: number): number;

/** Returns a date converted to a string using Universal Coordinated Time (UTC). */

toUTCString(): string;

/** Returns a date as a string value in ISO format. */

toISOString(): string;

/** Used by the JSON.stringify method to enable the transformation of an object's data for JavaScript Object Notation (JSON) serialization. */

toJSON(key?: any): string;

}

interface DateConstructor {

new (): Date;

new (value: number): Date;

new (value: string): Date;

new (year: number, month: number, date?: number, hours?: number, minutes?: number, seconds?: number, ms?: number): Date;

(): string;

readonly prototype: Date;

/**

* Parses a string containing a date, and returns the number of milliseconds between that date and midnight, January 1, 1970.

* @param s A date string

*/

parse(s: string): number;

/**

* Returns the number of milliseconds between midnight, January 1, 1970 Universal Coordinated Time (UTC) (or GMT) and the specified date.

* @param year The full year designation is required for cross-century date accuracy. If year is between 0 and 99 is used, then year is assumed to be 1900 + year.

* @param month The month as an number between 0 and 11 (January to December).

* @param date The date as an number between 1 and 31.

* @param hours Must be supplied if minutes is supplied. An number from 0 to 23 (midnight to 11pm) that specifies the hour.

* @param minutes Must be supplied if seconds is supplied. An number from 0 to 59 that specifies the minutes.

* @param seconds Must be supplied if milliseconds is supplied. An number from 0 to 59 that specifies the seconds.

* @param ms An number from 0 to 999 that specifies the milliseconds.

*/

UTC(year: number, month: number, date?: number, hours?: number, minutes?: number, seconds?: number, ms?: number): number;

now(): number;

}

declare const Date: DateConstructor;

interface RegExpMatchArray extends Array<string> {

index?: number;

input?: string;

}

interface RegExpExecArray extends Array<string> {

index: number;

input: string;

}

interface RegExp {

/**

* Executes a search on a string using a regular expression pattern, and returns an array containing the results of that search.

* @param string The String object or string literal on which to perform the search.

*/

exec(string: string): RegExpExecArray | null;

/**

* Returns a Boolean value that indicates whether or not a pattern exists in a searched string.

* @param string String on which to perform the search.

*/

test(string: string): boolean;

/** Returns a copy of the text of the regular expression pattern. Read-only. The regExp argument is a Regular expression object. It can be a variable name or a literal. */

readonly source: string;

/** Returns a Boolean value indicating the state of the global flag (g) used with a regular expression. Default is false. Read-only. */

readonly global: boolean;

/** Returns a Boolean value indicating the state of the ignoreCase flag (i) used with a regular expression. Default is false. Read-only. */

readonly ignoreCase: boolean;

/** Returns a Boolean value indicating the state of the multiline flag (m) used with a regular expression. Default is false. Read-only. */

readonly multiline: boolean;

lastIndex: number;

// Non-standard extensions

compile(): this;

}

interface RegExpConstructor {

new (pattern: RegExp): RegExp;

new (pattern: string, flags?: string): RegExp;

(pattern: RegExp): RegExp;

(pattern: string, flags?: string): RegExp;

readonly prototype: RegExp;

// Non-standard extensions

$1: string;

$2: string;

$3: string;

$4: string;

$5: string;

$6: string;

$7: string;

$8: string;

$9: string;

lastMatch: string;

}

declare const RegExp: RegExpConstructor;

interface Error {

name: string;

message: string;

stack?: string;

}

interface ErrorConstructor {

new (message?: string): Error;

(message?: string): Error;

readonly prototype: Error;

}

declare const Error: ErrorConstructor;

interface EvalError extends Error {

}

interface EvalErrorConstructor {

new (message?: string): EvalError;

(message?: string): EvalError;

readonly prototype: EvalError;

}

declare const EvalError: EvalErrorConstructor;

interface RangeError extends Error {

}

interface RangeErrorConstructor {

new (message?: string): RangeError;

(message?: string): RangeError;

readonly prototype: RangeError;

}

declare const RangeError: RangeErrorConstructor;

interface ReferenceError extends Error {

}

interface ReferenceErrorConstructor {

new (message?: string): ReferenceError;

(message?: string): ReferenceError;

readonly prototype: ReferenceError;

}

declare const ReferenceError: ReferenceErrorConstructor;

interface SyntaxError extends Error {

}

interface SyntaxErrorConstructor {

new (message?: string): SyntaxError;

(message?: string): SyntaxError;

readonly prototype: SyntaxError;

}

declare const SyntaxError: SyntaxErrorConstructor;

interface TypeError extends Error {

}

interface TypeErrorConstructor {

new (message?: string): TypeError;

(message?: string): TypeError;

readonly prototype: TypeError;

}

declare const TypeError: TypeErrorConstructor;

interface URIError extends Error {

}

interface URIErrorConstructor {

new (message?: string): URIError;

(message?: string): URIError;

readonly prototype: URIError;

}

declare const URIError: URIErrorConstructor;

interface JSON {

/**

* Converts a JavaScript Object Notation (JSON) string into an object.

* @param text A valid JSON string.

* @param reviver A function that transforms the results. This function is called for each member of the object.

* If a member contains nested objects, the nested objects are transformed before the parent object is.

*/

parse(text: string, reviver?: (key: any, value: any) => any): any;

/**

* Converts a JavaScript value to a JavaScript Object Notation (JSON) string.

* @param value A JavaScript value, usually an object or array, to be converted.

* @param replacer A function that transforms the results.

* @param space Adds indentation, white space, and line break characters to the return-value JSON text to make it easier to read.

*/

stringify(value: any, replacer?: (key: string, value: any) => any, space?: string | number): string;

/**