I have a Midea AC with RG56CMI-WP2 remote.
I am successfully able to perform the following operations using IRCoolixAC:
- on()
- off()
- setMode()
- setFan()
- setTemp()
- setTurbo()
- setSwing()
- setLed()
- setSwingVStep()
I was not able to get the setSleep() to work, I have not tested the other methods yet.
I read in the issues that there is some COOLIX48 support added for timer and I can confirm that the remote that I have also uses COOLIX48 for timers (both ON and OFF).
I also noted that when the OFF timer is set, all controls for changing the temp/mode/fan sent via the remote starts using COOLIX48.
How can this be done using this library as I am not sure how to use the COOLIX48 methods. If I hard code the value sent by the remote using sendCoolix48() I am able to get the AC timer set. But any other call to change the temp (e.g. setTemp()) removes the timer.
I used the SmartIRRepeater sample to understand that the remote uses COOLIX48 when using timer.
I have a Midea AC with RG56CMI-WP2 remote.
I am successfully able to perform the following operations using IRCoolixAC:
I was not able to get the setSleep() to work, I have not tested the other methods yet.
I read in the issues that there is some COOLIX48 support added for timer and I can confirm that the remote that I have also uses COOLIX48 for timers (both ON and OFF).
I also noted that when the OFF timer is set, all controls for changing the temp/mode/fan sent via the remote starts using COOLIX48.
How can this be done using this library as I am not sure how to use the COOLIX48 methods. If I hard code the value sent by the remote using sendCoolix48() I am able to get the AC timer set. But any other call to change the temp (e.g. setTemp()) removes the timer.
I used the SmartIRRepeater sample to understand that the remote uses COOLIX48 when using timer.