#!/usr/bin/env bats

load '../node_modules/bats-support/load'

load '../node_modules/bats-assert/load'

setup() {

# Define Paths for local repository used during tests

export FAKE_LOCAL_REPOSITORY="${BATS_TEST_DIRNAME}/tests_local_repository"

export FAKE_REMOTE="${BATS_TEST_DIRNAME}/tests_remote_repository"

export FAKE_TEMP_LOCAL_REPOSITORY="${BATS_TEST_DIRNAME}/tests_clone_of_remote_repository"

export FAKE_FOLDER_WITHOUT_GIT_REPO="/tmp/tests_folder_without_git_repo"

# While it is likely the GitHub hosted runners will use master as the default branch,

# locally anyone may change that. So for tests lets grab whatever is currently set

# globally. This should also ensure that changes to the GitHub hosted runners'

# config do not break tests in the future.

if [[ -z $(git config init.defaultBranch) ]]; then

git config --global init.defaultBranch "main"

fi

export FAKE_DEFAULT_BRANCH=$(git config init.defaultBranch)

# Set default INPUT variables used by the GitHub Action

export INPUT_CREATE_GIT_TAG_ONLY=false

export INPUT_REPOSITORY="${FAKE_LOCAL_REPOSITORY}"

export INPUT_COMMIT_MESSAGE="Commit Message"

export INPUT_BRANCH="${FAKE_DEFAULT_BRANCH}"

export INPUT_COMMIT_OPTIONS=""

export INPUT_ADD_OPTIONS=""

export INPUT_STATUS_OPTIONS=""

export INPUT_FILE_PATTERN="."

export INPUT_COMMIT_USER_NAME="Test Suite"

export INPUT_COMMIT_USER_EMAIL="test@github.com"

export INPUT_COMMIT_AUTHOR="Test Suite <test@users.noreply.github.com>"

export INPUT_TAG_NAME=""

export INPUT_TAGGING_MESSAGE=""

export INPUT_PUSH_OPTIONS=""

export INPUT_SKIP_DIRTY_CHECK=false

export INPUT_SKIP_FETCH=false

export INPUT_SKIP_CHECKOUT=false

export INPUT_SKIP_PUSH=false

export INPUT_DISABLE_GLOBBING=false

export INPUT_CREATE_BRANCH=false

export INPUT_DISABLE_PULL_REQUEST_TARGET_TRIGGER_WARNING=false

export INPUT_INTERNAL_GIT_BINARY=git

export INPUT_BEFORE_ADD_HOOK=""

export INPUT_AFTER_ADD_HOOK=""

export INPUT_BEFORE_COMMIT_HOOK=""

export INPUT_AFTER_COMMIT_HOOK=""

export INPUT_BEFORE_TAG_HOOK=""

export INPUT_AFTER_TAG_HOOK=""

export INPUT_BEFORE_PUSH_HOOK=""

export INPUT_AFTER_PUSH_HOOK=""

# Unset the GitHub event name by default so tests do not pick up

# pull_request_target from the environment of the shell running BATS.

unset GITHUB_EVENT_NAME

# Set GitHub environment variables used by the GitHub Action

temp_github_output_file=$(mktemp -t github_output_test.XXXXX)

export GITHUB_OUTPUT="${temp_github_output_file}"

# Configure Git

if [[ -z $(git config user.name) ]]; then

git config --global user.name "Test Suite"

git config --global user.email "test@github.com"

fi

# Create and setup some fake repositories for testing

_setup_fake_remote_repository

_setup_local_repository

}

teardown() {

rm -rf "${FAKE_LOCAL_REPOSITORY}"

rm -rf "${FAKE_REMOTE}"

rm -rf "${FAKE_TEMP_LOCAL_REPOSITORY}"

rm -rf "${INPUT_REPOSITORY}"

if [ -z ${GITHUB_OUTPUT+x} ]; then

echo "GITHUB_OUTPUT is not set"

else

rm "${GITHUB_OUTPUT}"

fi

}

# Create a fake remote repository which tests can push against

_setup_fake_remote_repository() {

# Create the bare repository, which will act as our remote/origin

rm -rf "${FAKE_REMOTE}"

mkdir "${FAKE_REMOTE}"

cd "${FAKE_REMOTE}"

git init --bare

# Clone the remote repository to a temporary location.

rm -rf "${FAKE_TEMP_LOCAL_REPOSITORY}"

git clone "${FAKE_REMOTE}" "${FAKE_TEMP_LOCAL_REPOSITORY}"

# Create some files, commit them and push them to the remote repository

touch "${FAKE_TEMP_LOCAL_REPOSITORY}"/remote-files{1,2,3}.txt

cd "${FAKE_TEMP_LOCAL_REPOSITORY}"

git add .

git commit --quiet -m "Init Remote Repository"

git push origin "${FAKE_DEFAULT_BRANCH}"

}

# Clone our fake remote repository and set it up for testing

_setup_local_repository() {

# Clone remote repository. In this repository we will do our testing

rm -rf "${FAKE_LOCAL_REPOSITORY}"

git clone "${FAKE_REMOTE}" "${FAKE_LOCAL_REPOSITORY}"

cd "${FAKE_LOCAL_REPOSITORY}"

}

# Run the main code related to this GitHub Action

git_auto_commit() {

bash "${BATS_TEST_DIRNAME}"/../entrypoint.sh

}

cat_github_output() {

# Be sure to dump anything we spit out to the environment file is

# also available for asserting

cat "${GITHUB_OUTPUT}"

}

@test "It detects changes, commits them and pushes them to the remote repository" {

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_success

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

assert_line "INPUT_BRANCH value: ${FAKE_DEFAULT_BRANCH}"

assert_line "INPUT_FILE_PATTERN: ."

assert_line "INPUT_COMMIT_OPTIONS: "

assert_line "::debug::Apply commit options "

assert_line "INPUT_TAG_NAME: "

assert_line "INPUT_TAGGING_MESSAGE: "

assert_line "Neither tag nor tag message is set. No tag will be added."

assert_line "INPUT_PUSH_OPTIONS: "

assert_line "::debug::Apply push options "

assert_line "::debug::Push commit to remote branch ${FAKE_DEFAULT_BRANCH}"

run cat_github_output

assert_line "changes_detected=true"

assert_line -e "commit_hash=[0-9a-f]{40}$"

}

@test "It detects when files have been deleted, commits changes and pushes them to the remote repository" {

rm -rf "${FAKE_LOCAL_REPOSITORY}"/remote-files1.txt

run git_auto_commit

assert_success

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

assert_line "INPUT_BRANCH value: ${FAKE_DEFAULT_BRANCH}"

assert_line "INPUT_FILE_PATTERN: ."

assert_line "INPUT_COMMIT_OPTIONS: "

assert_line "::debug::Apply commit options "

assert_line "INPUT_TAG_NAME: "

assert_line "INPUT_TAGGING_MESSAGE: "

assert_line "Neither tag nor tag message is set. No tag will be added."

assert_line "INPUT_PUSH_OPTIONS: "

assert_line "::debug::Apply push options "

assert_line "::debug::Push commit to remote branch ${FAKE_DEFAULT_BRANCH}"

run cat_github_output

assert_line "changes_detected=true"

assert_line -e "commit_hash=[0-9a-f]{40}$"

}

@test "It applies INPUT_STATUS_OPTIONS when running dirty check" {

INPUT_STATUS_OPTIONS="--untracked-files=no"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2}.php

run git_auto_commit

assert_success

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

assert_line "Working tree clean. Nothing to commit."

run cat_github_output

assert_line "changes_detected=false"

refute_line -e "commit_hash=[0-9a-f]{40}$"

}

@test "It prints a 'Nothing to commit' message in a clean repository" {

run git_auto_commit

assert_success

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

assert_line "Working tree clean. Nothing to commit."

run cat_github_output

assert_line "changes_detected=false"

refute_line -e "commit_hash=[0-9a-f]{40}$"

}

@test "If SKIP_DIRTY_CHECK is set to true on a clean repo it fails to push" {

INPUT_SKIP_DIRTY_CHECK=true

run git_auto_commit

assert_failure

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

assert_line "INPUT_FILE_PATTERN: ."

assert_line "INPUT_COMMIT_OPTIONS: "

assert_line "::debug::Apply commit options "

run cat_github_output

assert_line "changes_detected=true"

refute_line -e "commit_hash=[0-9a-f]{40}$"

}

@test "It applies INPUT_ADD_OPTIONS when adding files" {

INPUT_STATUS_OPTIONS="--untracked-files=no"

INPUT_ADD_OPTIONS="-u"

date >"${FAKE_LOCAL_REPOSITORY}"/remote-files1.txt

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2}.php

run git_auto_commit

assert_success

assert_line "INPUT_STATUS_OPTIONS: --untracked-files=no"

assert_line "INPUT_ADD_OPTIONS: -u"

assert_line "::debug::Push commit to remote branch ${FAKE_DEFAULT_BRANCH}"

# Assert that PHP files have not been added.

run git status

assert_output --partial 'new-file-1.php'

}

@test "It applies INPUT_FILE_PATTERN when creating commit" {

INPUT_FILE_PATTERN="src/*.js *.txt *.html"

mkdir src

touch src/new-file-{1,2}.js

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2}.php

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2}.html

run git_auto_commit

assert_success

assert_line "INPUT_FILE_PATTERN: src/*.js *.txt *.html"

assert_line "::debug::Push commit to remote branch ${FAKE_DEFAULT_BRANCH}"

# Assert that PHP files have not been added.

run git status

assert_output --partial 'new-file-1.php'

}

@test "It applies INPUT_COMMIT_OPTIONS when creating commit" {

INPUT_COMMIT_OPTIONS="--no-verify --signoff"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2}.txt

run git_auto_commit

assert_success

assert_line "INPUT_COMMIT_OPTIONS: --no-verify --signoff"

assert_line "::debug::Push commit to remote branch ${FAKE_DEFAULT_BRANCH}"

# Assert last commit was signed off

run git log -n 1

assert_output --partial "Signed-off-by:"

}

@test "It applies commit user and author settings" {

INPUT_COMMIT_USER_NAME="Custom User Name"

INPUT_COMMIT_USER_EMAIL="single-test@github.com"

INPUT_COMMIT_AUTHOR="A Single Test <single@users.noreply.github.com>"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2}.txt

run git_auto_commit

assert_success

assert_line "INPUT_COMMIT_USER_NAME: Custom User Name"

assert_line "INPUT_COMMIT_USER_EMAIL: single-test@github.com"

assert_line "INPUT_COMMIT_AUTHOR: A Single Test <single@users.noreply.github.com>"

assert_line "::debug::Push commit to remote branch ${FAKE_DEFAULT_BRANCH}"

# Asser last commit was made by the defined user/author

run git log -1 --pretty=format:'%ae'

assert_output --partial "single@users.noreply.github.com"

run git log -1 --pretty=format:'%an'

assert_output --partial "A Single Test"

run git log -1 --pretty=format:'%cn'

assert_output --partial "Custom User Name"

run git log -1 --pretty=format:'%ce'

assert_output --partial "single-test@github.com"

}

@test "It creates a tag with the commit" {

INPUT_TAG_NAME="v1.0.0"

INPUT_TAGGING_MESSAGE="MyProduct v1.0.0"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_success

assert_line "INPUT_TAG_NAME: v1.0.0"

assert_line "INPUT_TAGGING_MESSAGE: MyProduct v1.0.0"

assert_line "::debug::Create tag v1.0.0: MyProduct v1.0.0"

assert_line "::debug::Push commit to remote branch ${FAKE_DEFAULT_BRANCH}"

# Assert a tag v1.0.0 has been created

run git tag -n

assert_output 'v1.0.0 MyProduct v1.0.0'

run git ls-remote --tags --refs

assert_output --partial refs/tags/v1.0.0

# Assert that the commit has been pushed with --force and

# sha values are equal on local and remote

current_sha="$(git rev-parse --verify --short ${FAKE_DEFAULT_BRANCH})"

remote_sha="$(git rev-parse --verify --short origin/${FAKE_DEFAULT_BRANCH})"

assert_equal $current_sha $remote_sha

}

@test "It applies INPUT_PUSH_OPTIONS when pushing commit to remote" {

touch "${FAKE_TEMP_LOCAL_REPOSITORY}"/newer-remote-files{1,2,3}.txt

cd "${FAKE_TEMP_LOCAL_REPOSITORY}"

git add .

git commit --quiet -m "Add more remote files"

git push origin ${FAKE_DEFAULT_BRANCH}

INPUT_PUSH_OPTIONS="--force"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_success

assert_line "INPUT_PUSH_OPTIONS: --force"

assert_line "::debug::Apply push options --force"

assert_line "::debug::Push commit to remote branch ${FAKE_DEFAULT_BRANCH}"

# Assert that the commit has been pushed with --force and

# sha values are equal on local and remote

current_sha="$(git rev-parse --verify --short ${FAKE_DEFAULT_BRANCH})"

remote_sha="$(git rev-parse --verify --short origin/${FAKE_DEFAULT_BRANCH})"

assert_equal $current_sha $remote_sha

}

@test "If SKIP_PUSH is true git-push will not be called" {

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

INPUT_SKIP_PUSH=true

run git_auto_commit

assert_success

assert_line "::debug::git-push will not be executed."

# Assert that the sha values are not equal on local and remote

current_sha="$(git rev-parse --verify --short ${FAKE_DEFAULT_BRANCH})"

remote_sha="$(git rev-parse --verify --short origin/${FAKE_DEFAULT_BRANCH})"

refute [assert_equal $current_sha $remote_sha]

}

@test "It can checkout a different branch" {

# Create foo-branch and then immediately switch back to ${FAKE_DEFAULT_BRANCH}

git checkout -b foo

git checkout ${FAKE_DEFAULT_BRANCH}

INPUT_BRANCH="foo"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_success

assert_line "INPUT_BRANCH value: foo"

assert_line "::debug::Push commit to remote branch foo"

# Assert a new branch "foo" exists on remote

run git ls-remote --heads

assert_output --partial refs/heads/foo

}

@test "It uses existing branch name when pushing when INPUT_BRANCH is empty" {

INPUT_BRANCH=""

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_success

assert_line "INPUT_BRANCH value: "

assert_line --partial "::debug::git push origin"

# Assert that branch "${FAKE_DEFAULT_BRANCH}" was updated on remote

current_sha="$(git rev-parse --verify --short ${FAKE_DEFAULT_BRANCH})"

remote_sha="$(git rev-parse --verify --short origin/${FAKE_DEFAULT_BRANCH})"

assert_equal $current_sha $remote_sha

}

@test "It uses existing branch when INPUT_BRANCH is empty and INPUT_TAG is set" {

INPUT_BRANCH=""

INPUT_TAG_NAME="v2.0.0"

INPUT_TAGGING_MESSAGE="MyProduct v2.0.0"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_success

assert_line "INPUT_TAG_NAME: v2.0.0"

assert_line "::debug::Create tag v2.0.0: MyProduct v2.0.0"

assert_line "::debug::git push origin --tags"

# Assert a tag v2.0.0 has been created

run git tag

assert_output v2.0.0

# Assert tag v2.0.0 has been pushed to remote

run git ls-remote --tags --refs

assert_output --partial refs/tags/v2.0.0

}

@test "If SKIP_FETCH is true git-fetch will not be called" {

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

INPUT_SKIP_FETCH=true

run git_auto_commit

assert_success

assert_line "::debug::git-fetch will not be executed."

}

@test "If SKIP_CHECKOUT is true git-checkout will not be called" {

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

INPUT_SKIP_CHECKOUT=true

run git_auto_commit

assert_success

assert_line "::debug::git-checkout will not be executed."

}

@test "It pushes generated commit and tag to remote and actually updates the commit shas" {

INPUT_BRANCH=""

INPUT_TAG_NAME="v2.0.0"

INPUT_TAGGING_MESSAGE="MyProduct v2.0.0"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_success

assert_line "INPUT_TAG_NAME: v2.0.0"

assert_line "::debug::Create tag v2.0.0: MyProduct v2.0.0"

assert_line "::debug::git push origin --tags"

# Assert a tag v2.0.0 has been created

run git tag

assert_output v2.0.0

# Assert tag v2.0.0 has been pushed to remote

run git ls-remote --tags --refs

assert_output --partial refs/tags/v2.0.0

# Assert that branch "${FAKE_DEFAULT_BRANCH}" was updated on remote

current_sha="$(git rev-parse --verify --short ${FAKE_DEFAULT_BRANCH})"

remote_sha="$(git rev-parse --verify --short origin/${FAKE_DEFAULT_BRANCH})"

assert_equal $current_sha $remote_sha

}

@test "It pushes generated commit and tag to remote branch and updates commit sha" {

# Create "a-new-branch"-branch and then immediately switch back to ${FAKE_DEFAULT_BRANCH}

git checkout -b a-new-branch

git checkout ${FAKE_DEFAULT_BRANCH}

INPUT_BRANCH="a-new-branch"

INPUT_TAG_NAME="v2.0.0"

INPUT_TAGGING_MESSAGE="MyProduct v2.0.0"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_success

assert_line "INPUT_TAG_NAME: v2.0.0"

assert_line "::debug::Create tag v2.0.0: MyProduct v2.0.0"

assert_line "::debug::Push commit to remote branch a-new-branch"

# Assert a tag v2.0.0 has been created

run git tag

assert_output v2.0.0

# Assert tag v2.0.0 has been pushed to remote

run git ls-remote --tags --refs

assert_output --partial refs/tags/v2.0.0

# Assert that branch "a-new-branch" was updated on remote

current_sha="$(git rev-parse --verify --short a-new-branch)"

remote_sha="$(git rev-parse --verify --short origin/a-new-branch)"

assert_equal $current_sha $remote_sha

}

@test "It does not expand wildcard glob when using INPUT_PATTERN and INPUT_DISABLE_GLOBBING in git-status and git-add" {

# Create additional files in a nested directory structure

echo "Create Additional files"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-a.py

mkdir "${FAKE_LOCAL_REPOSITORY}"/nested

touch "${FAKE_LOCAL_REPOSITORY}"/nested/new-file-b.py

# Commit changes

echo "Commit changes before running git_auto_commit"

cd "${FAKE_LOCAL_REPOSITORY}"

git add . >/dev/null

git commit --quiet -m "Init Remote Repository"

git push origin ${FAKE_DEFAULT_BRANCH} >/dev/null

# Make nested file dirty

echo "foo-bar" >"${FAKE_LOCAL_REPOSITORY}"/nested/new-file-b.py

# ---

INPUT_FILE_PATTERN="*.py"

INPUT_DISABLE_GLOBBING=true

run git_auto_commit

assert_success

assert_line "INPUT_FILE_PATTERN: *.py"

assert_line "::debug::Push commit to remote branch ${FAKE_DEFAULT_BRANCH}"

# Assert that the updated py file has been commited.

run git status

refute_output --partial 'nested/new-file-b.py'

}

@test "it does not throw an error if not changes are detected and SKIP_DIRTY_CHECK is false" {

INPUT_FILE_PATTERN="."

INPUT_SKIP_DIRTY_CHECK=false

INPUT_SKIP_FETCH=false

run git_auto_commit

assert_success

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

run git status

assert_output --partial 'nothing to commit, working tree clean'

run cat_github_output

assert_line "changes_detected=false"

}

@test "It does not throw an error if branch is checked out with same name as a file or folder in the repo" {

# Add File called dev and commit/push

echo "Create dev file"

cd "${FAKE_LOCAL_REPOSITORY}"

echo this is a file named dev >dev

git add dev

git commit -m 'add file named dev'

git update-ref refs/remotes/origin/${FAKE_DEFAULT_BRANCH} ${FAKE_DEFAULT_BRANCH}

git update-ref refs/remotes/origin/dev ${FAKE_DEFAULT_BRANCH}

# ---

INPUT_BRANCH=dev

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{4,5,6}.txt

run git_auto_commit

assert_success

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

assert_line "::debug::Push commit to remote branch dev"

run cat_github_output

assert_line "changes_detected=true"

}

@test "It pushes commit to new branch that does not exist yet" {

INPUT_BRANCH="not-existend-branch"

run git branch

refute_line --partial "not-existend-branch"

run git branch -r

refute_line --partial "origin/not-existend-branch"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

INPUT_SKIP_CHECKOUT=true

run git_auto_commit

assert_success

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

assert_line "INPUT_BRANCH value: not-existend-branch"

run git branch

assert_line --partial ${FAKE_DEFAULT_BRANCH}

refute_line --partial "not-existend-branch"

run git branch -r

assert_line --partial "origin/not-existend-branch"

run cat_github_output

assert_line "changes_detected=true"

}

@test "It does not create new local branch and pushes the commit to a new branch on remote" {

INPUT_BRANCH="not-existend-branch"

run git branch

refute_line --partial "not-existend-branch"

run git branch -r

refute_line --partial "origin/not-existend-branch"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

INPUT_SKIP_CHECKOUT=true

run git_auto_commit

assert_success

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

assert_line "INPUT_BRANCH value: not-existend-branch"

assert_line "INPUT_FILE_PATTERN: ."

assert_line "INPUT_COMMIT_OPTIONS: "

assert_line "::debug::Apply commit options "

assert_line "INPUT_TAG_NAME: "

assert_line "INPUT_TAGGING_MESSAGE: "

assert_line "Neither tag nor tag message is set. No tag will be added."

assert_line "INPUT_PUSH_OPTIONS: "

assert_line "::debug::Apply push options "

assert_line "::debug::Push commit to remote branch not-existend-branch"

# Assert that local repo is still on default branch and not on new branch.

run git branch

assert_line --partial ${FAKE_DEFAULT_BRANCH}

refute_line --partial "not-existend-branch"

# Assert branch has been created on remote

run git branch -r

assert_line --partial "origin/not-existend-branch"

run cat_github_output

assert_line "changes_detected=true"

assert_line -e "commit_hash=[0-9a-f]{40}$"

}

@test "It creates new local branch and pushes branch to remote even if the remote branch already exists" {

# Create `existing-remote-branch` on remote with changes the local repository does not yet have

cd $FAKE_TEMP_LOCAL_REPOSITORY

git checkout -b "existing-remote-branch"

touch new-branch-file.txt

git add new-branch-file.txt

git commit -m "Add additional file"

git push origin existing-remote-branch

run git branch

assert_line --partial "existing-remote-branch"

# ---------

# Switch to our regular local repository and run `git-auto-commit`

cd $FAKE_LOCAL_REPOSITORY

INPUT_BRANCH="existing-remote-branch"

INPUT_SKIP_CHECKOUT=true

run git branch

refute_line --partial "existing-remote-branch"

run git fetch --all

run git pull origin existing-remote-branch

run git branch -r

assert_line --partial "origin/existing-remote-branch"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_success

assert_line "INPUT_REPOSITORY value: ${INPUT_REPOSITORY}"

assert_line "INPUT_BRANCH value: existing-remote-branch"

assert_line "INPUT_FILE_PATTERN: ."

assert_line "INPUT_COMMIT_OPTIONS: "

assert_line "::debug::Apply commit options "

assert_line "INPUT_TAG_NAME: "

assert_line "INPUT_TAGGING_MESSAGE: "

assert_line "Neither tag nor tag message is set. No tag will be added."

assert_line "INPUT_PUSH_OPTIONS: "

assert_line "::debug::Apply push options "

assert_line "::debug::Push commit to remote branch existing-remote-branch"

run git branch

assert_line --partial ${FAKE_DEFAULT_BRANCH}

refute_line --partial "existing-remote-branch"

run git branch -r

assert_line --partial "origin/existing-remote-branch"

# Assert that branch "existing-remote-branch" was updated on remote

current_sha="$(git rev-parse --verify --short ${FAKE_DEFAULT_BRANCH})"

remote_sha="$(git rev-parse --verify --short origin/existing-remote-branch)"

assert_equal $current_sha $remote_sha

run cat_github_output

assert_line "changes_detected=true"

assert_line -e "commit_hash=[0-9a-f]{40}$"

}

@test "It fails if local branch is behind remote and when remote has newer commits and skip_checkout is set to true" {

# Create `existing-remote-branch` on remote with changes the local repository does not yet have

cd $FAKE_TEMP_LOCAL_REPOSITORY

git checkout -b "existing-remote-branch"

touch new-branch-file.txt

git add new-branch-file.txt

git commit -m "Add additional file"

git push origin existing-remote-branch

run git branch

assert_line --partial "existing-remote-branch"

# ---------

# Switch to our regular local repository and run `git-auto-commit`

cd $FAKE_LOCAL_REPOSITORY

INPUT_BRANCH="existing-remote-branch"

INPUT_SKIP_CHECKOUT=true

run git branch

refute_line --partial "existing-remote-branch"

run git fetch --all

run git branch -r

assert_line --partial "origin/existing-remote-branch"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_failure

assert_line "hint: Updates were rejected because a pushed branch tip is behind its remote"

# Assert that branch exists locally and on remote

run git branch

assert_line --partial ${FAKE_DEFAULT_BRANCH}

refute_line --partial "existing-remote-branch"

run git branch -r

assert_line --partial "origin/existing-remote-branch"

# Assert that branch "existing-remote-branch" was not updated on remote

current_sha="$(git rev-parse --verify --short ${FAKE_DEFAULT_BRANCH})"

remote_sha="$(git rev-parse --verify --short origin/existing-remote-branch)"

refute [assert_equal $current_sha $remote_sha]

}

@test "It fails to push commit to remote if branch already exists and local repo is behind its remote counterpart and SKIP_CHECKOUT is used" {

# Create `new-branch` on remote with changes the local repository does not yet have

cd $FAKE_TEMP_LOCAL_REPOSITORY

git checkout -b "new-branch"

touch new-branch-file.txt

git add new-branch-file.txt

git commit --quiet -m "Add additional file"

git push origin new-branch

run git branch -r

assert_line --partial "origin/new-branch"

# ---------

# Switch to our regular local repository and run `git-auto-commit`

cd $FAKE_LOCAL_REPOSITORY

INPUT_BRANCH="new-branch"

INPUT_SKIP_CHECKOUT=true

# Assert that local remote does not have a "new-branch"-branch nor does

# know about the remote branch.

run git branch

refute_line --partial "new-branch"

run git branch -r

refute_line --partial "origin/new-branch"

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.txt

run git_auto_commit

assert_failure

assert_line "INPUT_BRANCH value: new-branch"

assert_line --partial "::debug::Push commit to remote branch new-branch"

assert_line --partial "Updates were rejected because a pushed branch tip is behind its remote"

}

@test "throws fatal error if file pattern includes files that do not exist" {

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.foo

INPUT_FILE_PATTERN="*.foo *.bar"

run git_auto_commit

assert_failure

assert_line --partial "fatal: pathspec '*.bar' did not match any files"

}

@test "does not throw fatal error if files for file pattern exist but only one is dirty" {

# Add some .foo and .bar files

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.foo

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{1,2,3}.bar

INPUT_FILE_PATTERN="*.foo *.bar"

run git_auto_commit

# Add more .foo files

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-{4,5,6}.foo

INPUT_FILE_PATTERN="*.foo *.bar"

run git_auto_commit

assert_success

}

@test "detects and commits changed files based on pattern in root and subfolders" {

# Add some .neon files

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-1.neon

mkdir foo

touch "${FAKE_LOCAL_REPOSITORY}"/foo/new-file-2.neon

INPUT_FILE_PATTERN="**/*.neon *.neon"

run git_auto_commit

assert_success

assert_line --partial "new-file-1.neon"

assert_line --partial "foo/new-file-2.neon"

}

@test "throws error if tries to force add ignored files which do not have any changes" {

# Create 2 files which will later will be added to .gitignore

touch "${FAKE_LOCAL_REPOSITORY}"/ignored-file.txt

touch "${FAKE_LOCAL_REPOSITORY}"/another-ignored-file.txt

# Commit the 2 new files

run git_auto_commit

# Add our txt files to gitignore

echo "ignored-file.txt" >>"${FAKE_LOCAL_REPOSITORY}"/.gitignore

echo "another-ignored-file.txt" >>"${FAKE_LOCAL_REPOSITORY}"/.gitignore

# Commit & push .gitignore changes

run git_auto_commit

# Sanity check that txt files are ignored

run cat "${FAKE_LOCAL_REPOSITORY}"/.gitignore

assert_output --partial "ignored-file.txt"

assert_output --partial "another-ignored-file.txt"

# Configure git-auto-commit

INPUT_SKIP_DIRTY_CHECK=true

INPUT_ADD_OPTIONS="-f"

INPUT_FILE_PATTERN="ignored-file.txt another-ignored-file.txt"

# Run git-auto-commit with special configuration

run git_auto_commit

assert_output --partial "nothing to commit, working tree clean"

assert_failure

}

@test "expands file patterns correctly and commits all changed files" {

# Add more .txt files

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-1.txt

mkdir "${FAKE_LOCAL_REPOSITORY}"/subdirectory/

touch "${FAKE_LOCAL_REPOSITORY}"/subdirectory/new-file-2.txt

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-3.bar

INPUT_FILE_PATTERN="*.txt *.bar"

run git_auto_commit

assert_success

assert_line --partial "new-file-1.txt"

assert_line --partial "subdirectory/new-file-2.txt"

assert_line --partial "new-file-3.bar"

}

@test "expands file patterns correctly and commits all changed files when globbing is disabled" {

# Add more .txt files

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-1.txt

mkdir "${FAKE_LOCAL_REPOSITORY}"/subdirectory/

touch "${FAKE_LOCAL_REPOSITORY}"/subdirectory/new-file-2.txt

touch "${FAKE_LOCAL_REPOSITORY}"/new-file-3.bar

INPUT_FILE_PATTERN="*.txt *.bar"

INPUT_DISABLE_GLOBBING=true

run git_auto_commit

assert_success

assert_line --partial "new-file-1.txt"

assert_line --partial "subdirectory/new-file-2.txt"

assert_line --partial "new-file-3.bar"

}

@test "expands file patterns correctly and commits all changed files if dirty files are only in subdirectory" {

# Add more .txt files

mkdir "${FAKE_LOCAL_REPOSITORY}"/subdirectory/

touch "${FAKE_LOCAL_REPOSITORY}"/subdirectory/new-file-2.txt

mkdir "${FAKE_LOCAL_REPOSITORY}"/another-subdirectory/

touch "${FAKE_LOCAL_REPOSITORY}"/another-subdirectory/new-file-3.txt

INPUT_FILE_PATTERN="*.txt"

INPUT_DISABLE_GLOBBING=true

run git_auto_commit

assert_success

assert_line --partial "subdirectory/new-file-2.txt"

assert_line --partial "another-subdirectory/new-file-3.txt"

}

@test "detects if crlf in files change and does not create commit" {

# Set autocrlf to true

cd "${FAKE_LOCAL_REPOSITORY}"

git config core.autocrlf true

run git config --get-all core.autocrlf

assert_line "true"

# Add more .txt files

echo -ne "crlf test1\r\n" > "${FAKE_LOCAL_REPOSITORY}"/new-file-2.txt

echo -ne "crlf test1\n" > "${FAKE_LOCAL_REPOSITORY}"/new-file-3.txt

# Run git-auto-commit to add new files to repository

run git_auto_commit

# Change control characters in files